28 November, 2005d>

This page was last updated on the 28 November, 2005

|

Epic 40K Logo

Epic Armageddon Ork Junkatrukks

previous page

I have also painted the metal areas, by given them a base coat of black.

The metal areas will be drybrushed with Tin Bitz and Boltgun Metal, I will then touch up the white areas before painting the bodywork in reds, yellows and orange colours.

You can see in this picture how I have drybrushed the metal, first with Tin Bitz and then with Boltgun Metal.

The next stage is to paint in the base colour.

The models were painted vomit brown and then given an ink wash.

Before I would use a plain ink wash, but after reading an article on Dropship, I added some Scorched Brown to the ink and water mix and as a result the finished models are not as glossy as when I have used an ink wash.

Here are two Junkatrukks that I have finished for my Feral Ork Army. I know they could do with some detailing and maybe the odd glyph or two...

The models were painted orange and light brown and then given an ink wash.

Before I would use a plain ink wash, but after reading an article on Dropship, I added some Vomit Brown to the ink and water mix and as a result the finished models are not as glossy as when I have used an ink wash.

The models were then drybrushed with the original base coat to highlight and to matt down the slight glossness caused by the wash.

Also you may notice for my Feral Orks that I (for once) am following fashion and I am basing my vehicles...

next page